"Ask Me Anything:10 Answers To Your Questions About Lock Replacement

Door Lock Replacement - What Are the Different Parts of a Door Lock?

A damaged door lock could make your home a to target for burglars. Changing your lock is an inexpensive method to increase security without making your door unusable.

Many locks come packaged with a cardboard template that you can wrap around the edge of your door to ensure that it fits properly. This will ensure that you don't buy the wrong lock.

The Cylinder

The cylinder is the main component of a mechanical door lock. It houses a series of spring-loaded pins that keep the door locked even when no key is placed into the hole. When keys are put into the doorknob the uneven edge presses upwards on the pins within the cylinder, allowing them to fit into their proper place. When the pins are in place, they allow for the bolt (also called the latch) to move forward, engaging the door's interior.

The bolt extends from the cylinder into a hole in your door frame called the box. The box is designed so that the bolt cannot be easily removed. The bolt is retracted by a clip spring when the door closes. When you turn the handle, a spindle is designed to rotate inside the cylinder. After it has completed its rotation the slanted side of the bolt is retracted into the doorframe. The bolt rests on the carved-out portion of the doorframe, and closes the door until you are required to reopen it.

A faceplate is a metallic plate that attaches to the interior of your door, on either side of the deadbolt hole. Its function is to protect the locking mechanism from damage caused by your knob's continual insertion and removal. If you're installing a new lock, make sure that the faceplate lines up with the hole in your door frame and is securely secured to the plate and to the latch bore.

If you're replacing the door lock ensure that the deadbolt fits correctly by sliding it into the strike plate's opening hole. Once you're done then screw the strikeplate as well as the core of your lock into place. Be careful not to over-tighten, as this can damage the latch and prevent it from securing in its groove correctly. You can test your new lock by rotating the key until it is locked position. If you spot any issues, like loose latches or a noisy deadbolt, it's time to replace your old lock with a new lock.

The Faceplate

A faceplate is a large flat plate that mounts to the headstock of a lathe in order to hold the workpiece. The screw thread is inserted into the wood using a series of screw holes. Faceplates can be used to support a variety of shapes but they are more difficult to employ than a chuck as they need to be positioned properly, fixed, and balanced.

A typical faceplate is fitted with mounting holes. In this instance three holes are placed at 120 degrees intervals to accept the screws for mounting in FIGURE. 2. The screw holes are made through an interchangeable insert 16 or directly into the faceplate's body. An intermediate portion of the faceplate is a stepped section which serves as an index to identify a specific place on the blank of the workpiece.

The stepping area has been designed to be abrasion-resistant so that the fastener won't harm the chisel that you use to cut it. The surface of the body of the faceplate has distinct properties from that of the surrounding region. Machining into this region warns the operator of a possible contact with a fastener, and gives the turner time to react.

Screws used to fix to a faceplate should have a small amount of free play in the screw hole. When the screw is fastened onto the glue block, there must be no space behind it. This may permit the block during rotation to shift. It is also an ideal idea to use a larger gauge screw since it will seat more securely in the faceplate. The screw should go through the middle of the screwhole to prevent the possibility that the screwhead could get into contact with the workpiece.

The Strike Plate

The strike plate is among the most vital components of your door lock. It is what prevents the bolt from slipping out when you shut the door. The strike plate is part of the system that helps increase the strength of the lock and prevent intrusions by using force against the latch bolt and jamb.

A strike plate is a large metal plate that installs in the doorjamb (the vertical portion of the frame) with a hole that allows the deadbolt or latch to be able to pass through. When the cylinder rotates, the bolt shoots through the strike plate into the doorjamb, securing it shut.

There are several different types of strike plates based on your requirements. If you require a strikeplate to fit your lock, the information will list the type of strikeplate you need. Most strike plates are the same and will work with standard latches and lock.

Standard strike plates are usually equipped with ovular screws and the "C"-shaped piece that serves as a washer. They are usually used on doors with rounded corners and come in a variety of sizes to match your door.

To increase security, you can choose a strike plate that has no lip and is created specifically for deadbolts. This is an excellent choice in areas where security needs to be quickly achieved like staircases. This is an excellent option if you want to protect items or documents inside your home.

Another method to increase the security of your door is by installing the box strike plate which adds thickness and reinforcement to the strike plate. This makes it more difficult to break in through the latch or deadbolt, and it's often required for commercial doors equipped with security locks.

If your strike plate is misaligned with the latch bolt try spraying it with a good lock lubricant. If this doesn't work, then you'll need to adjust the strike plate by drilling new holes in the screw and widening the hole for the catch. Be careful not to make too many adjustments to the strike plate, because repeated and drastic changes can weaken it to the point where it's no longer efficient.

The Deadbolt

A deadbolt lock is a sturdy bolt made of steel that ties your door to the doorjamb's frame. Unlike a spring-latch used in doorknobs that can be tied (jimmied) using credit cards or other tools such as latch slips, a deadbolt is locked using the use of a key, thumb turn or electronically (in the case of keyless and smart deadbolts). They are easier to use and require less maintenance. They also provide better protection against forced entry methods like kick-ins.

The bolt extends through a socket or hole in the door jamb, which is then strengthened by a strike plate to provide extra security. The bolt should be minimum of 1 inch in length to make it difficult to remove the door. It is also important to choose a quality deadbolt that has an ANSI rating that shows how secure the lock has been tested.

The strike plate also helps to hold the cylinder in place. Three holes should be placed through the bolt. One in the middle connects the facepiece to the cylinder, and the remaining two are on either side of the central hole. These are where the screws connect the cylinder to the bolt. The screws must be included with the new deadbolt.  replace window locks repairmywindowsanddoors.co.uk  have decorative covers that are attached to the facepieces. Check the instructions supplied by the manufacturer to ensure they are correctly installed.

When selecting the best lock for your home take into consideration your lifestyle and the level of security that you need. Single cylinder deadbolts are the most commonly used lock type are used on many exterior doors. Keyless deadbolts are safer however they are difficult to operate. Smart deadbolts permit you to lock and unlock the bolt by voice commands or an mobile application.

A professional locksmith will help you decide what type of lock is best for your home. They will install or replace the lock. Upgrade your front door lock to increase the security of your home. You can consider installing a double-cylinder, or reversible deadbolt to the side of your front door to provide an additional layer of security.